AT SENSEFLY,

THE QUALITY

OF OUR PRODUCTS

IS OUR TOP

PRIORITY

Safety first

Inspired by the aviation backgrounds of our founders, we test both individual components and finished drones extensively to achieve the highest possible level of safety and reliability.

senseFly drones are flying continually, all over the world. They are flown by our team, our distribution partners and, of course, our customers. The usage data from these flights, for those operators that agree to provide it, provides our R&D and production staff with continuous, detailed feedback—a raft of information that we use to further enhance and optimise our systems.

Safety first
Checked, checked, and checked again

Checked, checked, and checked again

  • senseFly drones undergo quality checks at each stage of production
  • Every component is individually tested and calibrated, including at different temperatures
  • Every finished drone is flight tested
  • Each drone & its components are then re-verified before shipping

"With our eBee we can provide our final data in just a few days, whereas previously this would have taken much longer, meaning we can pass savings directly on to our clients. The fact that the eBee is lightweight and highly transportable are also big benefits (we avoided products that require a special ramp to get airborne). Most importantly, the eBee allows us to operate safely and it’s highly reliable — even when simulating critical errors as part of our annual flight assessment I have complete confidence that it will do exactly what we ask it to."

Chris Slee, Director
ATEC-3D, United Kingdom
Read more about this customer

Chris Slee, Director

"The eBee is the heart of my operation, allowing me to offer clients an affordable and reliable service that wasn't previously available in this part of the world. My drone has already logged 182 problem-free flights and has proved durable enough to handle the toughest African operating conditions. The best part? The feedback I receive from clients - they love our cost effectiveness and they love reducing the number of personnel working inside their mining sites."

Theo Wolmarans, Director
ICARUS AT Pty Ltd, South Africa

Theo Wolmarans, Director

"It’s important that UAS products are autonomous and in the case of the eBee this is very true; I found its take-off and landing particularly well thought out. The safety measures embedded in its eMotion software are also smart."

Peter Spruyt, Senior Scientific Officer
Joint Research Centre - European Commission, Netherlands
Read more about this customer

Peter Spruyt, Senior Scientific Officer

"We use an eBee for many different projects: mapping, road and railway projects, power lines, dam and construction projects, renewable energy and more. For us, it is the most effective drone on the market. It is the perfect intersection of user-friendliness, quality, price, support, and software."

Diner Yılmaz, General Director
Artu Harita Bilişim GIS Mühendislik, Turkey
Read more about this customer

Diner Yılmaz, General Director

"We needed a system that would get us GIS-ready 2D and 3D products in a timely manner. The senseFly eBee is just that. With a fully integrated workflow the eBee allows us to focus on making use of the data as opposed to worrying about flight operations and data processing. We have flown the eBee in all types of weather conditions and have been extraordinarily impressed with its reliability."

Jarlath O’Neil-Dunne, Director
University of Vermont Spatial Analysis Laboratory, United States

Jarlath O’Neil-Dunne, Director

"We evaluated the swinglet CAM against the national standards for producing municipal cartography in Portugal. We were impressed with how easy it was to plan and execute the flight. The waypoint flight planning was strictly followed; take-off and landing were both simple and safe. The plane safely returned to the starting point when faced with excessive wind conditions. Our studies also confirmed the positional and thematic accuracy of the post-processing products generated from the flight: True-orthophoto, Digital Elevation Model and stereoscopic models. senseFly always provided good support, replying to all our doubts and questions."

Luís Serra
Msc Geomatic Engineering, Portugal

Luís Serra

"We currently operate two eBee UAVs, which have completed well over 1,300 flights, so we’ve given these aircraft quite a workout. For us there is no typical project; we undertake work across Australia in plantation forestry, mining, land development, aboriginal heritage, flood prevention survey, insurance, agriculture and natural resource management. Our experience has been very good—the eBee system is easy to use, has proved reliable and its data is well received by clients. At this stage we’ve been unable to find a UAV that is as versatile."

James Rennie, Director
Australian UAV

James Rennie, Director

"In addition to the albris’ technological prowess, congratulations on this drone’s user manual too. It is well written and very clear, an often overlooked benefit."

Yann Huet, Ing. Matériaux EPFL,
Geotest SA, Switzerland

Yann Huet, Ing. Matériaux EPFL,

"Our senseFly UAVs have quickly become essential tools. They are deployed quickly and allow us to survey entire sites in a short space of time — from wind farms to dams, historic sites, and music festivals. With our drones we can produce crystal clear orthomosaics and accurate elevation models, more cost effectively than traditional aerial surveying, and more quickly than using terrestrial surveying methods."

Mark Entwistle, Managing Director
KaarbonTech, United Kingdom

Mark Entwistle, Managing Director

"The sensefly eBee changed the game for us, allowing us to move from being UAV hobbyists into offering professional drone services. We deploy it for many commercial applications, in mining & construction, right around the world. We can deliver highly accurate data sets to customers within days of being on-location, faster, more safely, and more efficiently than previous technology and service providers in these industries were able to provide. This technology has been just wonderful to work with."

Brian Deatherage, CEO
Phoenix Drone Service LLC, United States

Brian Deatherage, CEO

What do we calibrate?

  1. Temperature calibration of autopilot (barometer, pressure sensor, gyroscope & accelerometer are tested in a climatic chamber)
  2. IMU calibration of gyroscope & accelerometer
  3. Current calibration of motor power supply by autopilot
  4. Servo & trim calibration
  5. In-air pitot calibration (testing of air speed values)
What do we calibrate?

ALL SENSEFLY PRODUCTS

ARE SUPPLIED WITH

A ONE-YEAR

LIMITED WARRANTY

& LIFETIME SUPPORT