albris

The intelligent mapping & inspection drone

Why choose the albris?

The senseFly albris is the sensor-rich drone for professionals, offering TripleView imaging and advanced situational awareness.

Efficient

Switch between capturing video, still and thermal imagery during the same flight, without landing to change cameras.

Aware

The drone’s five dual-sensor modules provide the situational awareness required to operate albris close to structures and surfaces, to achieve sub-millimetre image resolutions.

Flexible

Choose the flight mode that best fits your project: an autonomous, GPS-guided mapping mission or a live-streaming Interactive ScreenFly flight. Or start in mapping mode and ‘go live’ on demand.

Explore

Includes eMotion 3

Simplicity meets power

Beginner-friendly, yet packed with advanced features to optimise results.

Flexible
Full 3D environment
Connected

Specifications

Results
Hardware
Software
Operation

Results

Ground sampling distance 1
Down to 1 mm (0.04 in)/pixel
Absolute X, Y, Z accuracy (RTK/PPK activated)
--
Absolute horizontal/vertical accuracy (w/GCPs)
Down to 1 mm (0.04 in)
Absolute horizontal/vertical accuracy (no GCPs)
1 - 5 m (3 - 16 ft)
Nominal coverage at 120 m (400 ft) 2
20 ha (~50 ac)
Max. coverage at 2,000 m (6,500 ft) 3
--

Hardware

Software

Operation

  1. Flight height above ground level; results excl. reconstructible zone around planned area
  2. Flight height above ground level; results incl. reconstructible zone around planned area
  3. Using drone’s supplied camera & based on flight height above ground of 42 m/140 ft (albris: 6 m/19.7 ft). Results also dependant upon environmental conditions (light, wind, surface type)
  4. Optional in Turkey
  5. In ideal conditions
  6. Direct point-to-point flight in optimal conditions. Such a flight may be subject to BVLOS flight permission

What our customers say

senseFly and Pix4D offer a turnkey solution - from take-off to the final 3D model - which I would recommend. It avoids wasting time, plus you benefit from customer support which has proved very efficient.

Yann Huet

Project Leader, Geotest SA, Switzerland

The Oregon DOT's original goal was the capture high-res still images to check for defects, but when they realised we could get a 3D model - in effect a digital database of a structure - with the exact geometry of the object, that was something they were really excited about.

Dan Gillins

Assistant Professor of Geomatics, Oregon State University, United States

The inspection detail that drones provide effectively replicates some of the detail learned through the use of snoopers, without the traffic control requirements, and at significantly lower cost in terms of equipment and traffic control needs.

Jennifer Zink

State Bridge Inspection Engineer, Minnesota DOT, United States

Output compatibility

Orthomosaic raster

geoTIFF (.tiff), KML tiles (.png/.kml)

Compatible with

Index map

geoTIFF (.tiff), .shp

Compatible with

3D point cloud

.las, .laz, .ply, .ascii

Compatible with

Digital surface model (DSM)

geoTIFF (.tiff)

Compatible with

3D mesh with texture

Wavefront (.obj)

Compatible with

Contour lines

.dxf, .shp

Compatible with

Google Maps / Mapbox tiles

KML tiles (.png/.kml)

Compatible with

Undistorted images

.tiff

Compatible with

Download your albris brochure

Choose language

English

Enjoy our full support, wherever you are

senseFly solutions include lifetime hardware, payload and eMotion software support (plus free lifetime eMotion and firmware updates). We also understand that the best support is local support. That’s why we have created and continue to grow our global network of support service centres. Full training on our products, meanwhile, is available at every senseFly point of sale. Training typically lasts one to two days.

Learn more

Enjoy our full support, wherever you are

senseFly solutions include lifetime hardware, payload and eMotion software support (plus free lifetime eMotion and firmware updates). We also understand that the best support is local support. That’s why we have created and continue to grow our global network of support service centres. Full training on our products, meanwhile, is available at every senseFly point of sale. Training typically lasts one to two days.

Learn more

Join over 16,000 geospatial professionals